Sabre 1848HV Manual do Operador descarregar pdf (Página 22)

100

Operating Machine - Page 18

OPERATING MACHINE

Starting Engine

NOTE: Engine will not start unless: PTO switch is

DISENGAGED, park brake is LOCKED or brake

pedal pushed down. On GEAR model: The

transmission shift lever should be in N (NEUTRAL)

position.

1. On GEAR model: Move transmission shift lever (A) to

N (NEUTRAL) position.

Picture Note: Gear Model Shown

2. Lock the park brake (B).

3. Push PTO switch (C) down to DISENGAGE.

4. Pull choke knob (D) out to the ON (

) position.

5. Move throttle lever (E) to the HALF-SPEED (

)

position.

Picture Note: Automatic Model Shown

6. Turn key (F) to START position.

7. When engine starts, release key to RUN position.

8. Check starting conditions:

•

If engine is COLD:

Gradually return the choke to

the OFF position after the engine starts and warms

up. (See Cold Weather Starting in this section.)

•

If engine is WARM:

Return choke to the OFF

position as soon as the engine starts.

9. Let engine run for a couple of minutes to warm-up

before operating tractor.

CAUTION: Start engine ONLY outdoors or in a

well ventilated place. Exhaust fumes are

dangerous.

IMPORTANT:

Do not operate starter more than 20

seconds at a time, or you may damage

it. If engine does not start: Wait two

minutes before you try again. See

Troubleshooting section.

M88556

M88561

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 99 100

Comentários a estes Manuais

Sem comentários

Sabre 1848HV Manual do Operador Página 22

Comentários a estes Manuais